| |
 |
 |
|
|
|
|
|
|
mod
BUS_CONFIG_INTR(9) - configure interrupt polarity and trigger mode
DECLARE_MODULE(9) - kernel module declaration macro
DEV_MODULE(9) - device driver module declaration macro
DRIVER_MODULE(9) - kernel driver declaration macro
GEOM(4) - modular disk I/O request transformation framework
MODULE_DEPEND(9) - set kernel module dependencies
MODULE_VERSION(9) - set kernel module version
SYSCALL_MODULE(9) - syscall kernel module declaration macro
VGLBitmapAllocateBits(3), VGLBitmapCopy(3), VGLBitmapCreate(3), VGLBitmapDestroy(3), VGLBitmapPutChar(3), VGLBitmapString(3), VGLBlankDisplay(3), VGLBox(3), VGLCheckSwitch(3), VGLClear(3), VGLEllipse(3), VGLEnd(3), VGLFilledBox(3), VGLFilledEllipse(3), VGLGetXY(3), VGLInit(3), VGLLine(3), VGLKeyboardInit(3), VGLKeyboardEnd(3), VGLKeyboardGetCh(3), VGLMouseInit(3), VGLMouseMode(3), VGLMouseSetImage(3), VGLMouseSetStdImage(3), VGLMouseStatus(3), VGLPanScreen(3), VGLSetBorder(3), VGLSetPalette(3), VGLSetPaletteIndex(3), VGLSetVScreenSize(3), VGLSetXY(3), VGLTextSetFontFile(3) - Video Graphics Library functions
accept_filter(9), accept_filt_add(9), accept_filt_del(9), accept_filt_generic_mod_event(9), accept_filt_get(9) - filter incoming connections
ar(1) - create, modify, and extract from archives
archive_entry_acl_add_entry(3), archive_entry_acl_add_entry_w(3), archive_entry_acl_clear(3), archive_entry_acl_count(3), archive_entry_acl_next(3), archive_entry_acl_next_w(3), archive_entry_acl_reset(3), archive_entry_acl_text_w(3), archive_entry_atime(3), archive_entry_atime_nsec(3), archive_entry_clear(3), archive_entry_clone(3), archive_entry_copy_fflags_text_w(3), archive_entry_copy_gname_w(3), archive_entry_copy_hardlink(3), archive_entry_copy_hardlink_w(3), archive_entry_copy_pathname_w(3), archive_entry_copy_stat(3), archive_entry_copy_symlink_w(3), archive_entry_copy_uname_w(3), archive_entry_dev(3), archive_entry_fflags(3), archive_entry_fflags_text(3), archive_entry_free(3), archive_entry_gid(3), archive_entry_gname(3), archive_entry_hardlink(3), archive_entry_ino(3), archive_entry_mode(3), archive_entry_mtime(3), archive_entry_mtime_nsec(3), archive_entry_new(3), archive_entry_pathname(3), archive_entry_pathname_w(3), archive_entry_rdev(3), archive_entry_rdevmajor(3), archive_entry_rdevminor(3), archive_entry_set_fflags(3), archive_entry_set_gid(3), archive_entry_set_gname(3), archive_entry_set_hardlink(3), archive_entry_set_link(3), archive_entry_set_mode(3), archive_entry_set_mtime(3), archive_entry_set_pathname(3), archive_entry_set_rdevmajor(3), archive_entry_set_rdevminor(3), archive_entry_set_size(3), archive_entry_set_symlink(3), archive_entry_set_uid(3), archive_entry_set_uname(3), archive_entry_size(3), archive_entry_stat(3), archive_entry_symlink(3), archive_entry_uid(3), archive_entry_uname(3) - functions for manipulating archive entry descriptions
atapicam(4) - CAM XPT (transport) module for ATAPI devices
audit.log(5), audit(5) - Basic Security Module (BSM) File Format
bsd.snmpmod.mk(7) - building modules for bsnmpd(1)
chat(8) - Automated conversational script with a modem
chmod(1) - change file modes
chmod(2), fchmod(2), lchmod(2) - change mode of file
def_prog_mode(3), def_shell_mode(3), reset_prog_mode(3), reset_shell_mode(3), resetty(3), savetty(3), getsyx(3), setsyx(3), ripoffline(3), curs_set(3), napms(3) - low-level curses routines
exca(4) - helper module for PC Card and CardBus systems
fdcontrol(8) - display and modify floppy disk parameters
fmod(3), fmodf(3) - floating-point remainder functions
ftpio(3), ftpLogin(3), ftpChdir(3), ftpErrno(3), ftpGetModtime(3), ftpGetSize(3), ftpGet(3), ftpPut(3), ftpBinary(3), ftpPassive(3), ftpVerbose(3), ftpGetURL(3), ftpPutURL(3), ftpLoginAf(3), ftpGetURLAf(3), ftpPutURLAf(3) - FTPIO user library
getmode(3), setmode(3) - modify mode bits
getty(8) - set terminal mode
ieee80211_ifattach(9), ieee80211_ifdetach(9), ieee80211_mhz2ieee(9), ieee80211_chan2ieee(9), ieee80211_ieee2mhz(9), ieee80211_media_init(9), ieee80211_media_change(9), ieee80211_media_status(9), ieee80211_watchdog(9), ieee80211_setmode(9), ieee80211_chan2mode(9), ieee80211_rate2media(9), ieee80211_media2rate(9) - core 802.11 network stack functions
ispfw(4) - Firmware Module for Qlogic based SCSI and FibreChannel SCSI Host Adapters
kenv(1) - dump or modify the kernel environment
kldconfig(8) - display or modify the kernel module search path
kldfirstmod(2) - return first module id from the kld file specified
libbsm(3) - Basic Security Module (BSM) Audit API
mac_none(4) - null MAC policy module
mac_stub(4) - MAC policy stub module
makecontext(3), swapcontext(3) - modify and exchange user thread contexts
modf(3) - extract signed integral and fractional values from floating-point number
modfind(2) - returns the modid of a kernel module
modnext(2) - return the modid of the next kernel module
modstat(2) - get status of kernel module
module(9) - structure describing a kernel module
moduli(5) - system moduli file
natm(4) - Native Mode ATM protocol layer
ndisgen(8) - generate a FreeBSD driver module from a Windows[rg] NDIS driver distribution
ngatmbase(4) - netgraph ATM utility module
nmdm(4) - nullmodem terminal driver
openpam_borrow_cred(3), openpam_free_data(3), openpam_free_envlist(3), openpam_get_option(3), openpam_log(3), openpam_nullconv(3), openpam_readline(3), openpam_restore_cred(3), openpam_set_option(3), openpam_ttyconv(3), pam_error(3), pam_get_authtok(3), pam_info(3), pam_prompt(3), pam_setenv(3), pam_verror(3), pam_vinfo(3), pam_vprompt(3) - Pluggable Authentication Modules Library
openpam_get_option(3) - returns the value of a module option
openpam_set_option(3) - sets the value of a module option
pam_acct_mgmt(3), pam_authenticate(3), pam_chauthtok(3), pam_close_session(3), pam_end(3), pam_get_data(3), pam_get_item(3), pam_get_user(3), pam_getenv(3), pam_getenvlist(3), pam_open_session(3), pam_putenv(3), pam_set_data(3), pam_set_item(3), pam_setcred(3), pam_start(3), pam_strerror(3) - Pluggable Authentication Modules Library
pam_chroot(8) - Chroot PAM module
pam_deny(8) - Deny PAM module
pam_echo(8) - Echo PAM module
pam_exec(8) - Exec PAM module
pam_ftpusers(8) - ftpusers PAM module
pam_get_data(3) - get module information
pam_group(8) - Group PAM module
pam_guest(8) - Guest PAM module
pam_krb5(8) - Kerberos 5 PAM module
pam_ksu(8) - Kerberos 5 SU PAM module
pam_lastlog(8) - login accounting PAM module
pam_login_access(8) - login.access PAM module
pam_nologin(8) - NoLogin PAM module
pam_opie(8) - OPIE PAM module
pam_opieaccess(8) - OPIEAccess PAM module
pam_passwdqc(8) - Password quality-control PAM module
pam_permit(8) - Promiscuous PAM module
pam_radius(8) - RADIUS authentication PAM module
pam_rhosts(8) - Rhosts PAM module
pam_rootok(8) - RootOK PAM module
pam_securetty(8) - SecureTTY PAM module
pam_self(8) - Self PAM module
pam_set_data(3) - set module information
pam_setcred(3) - modify / delete user credentials for an authentication service
pam_sm_acct_mgmt(3) - service module implementation for pam_acct_mgmt
pam_sm_authenticate(3) - service module implementation for pam_authenticate
pam_sm_chauthtok(3) - service module implementation for pam_chauthtok
pam_sm_close_session(3) - service module implementation for pam_close_session
pam_sm_open_session(3) - service module implementation for pam_open_session
pam_sm_setcred(3) - service module implementation for pam_setcred
pam_tacplus(8) - TACACS+ authentication PAM module
pam_unix(8) - UNIX PAM module
passwd(1), yppasswd(1) - modify a user's password
pmap_clear_modify(9), pmap_clear_reference(9) - set information about physical pages
pmap_is_modified(9), pmap_ts_modified(9) - return information about physical pages
pmc_allocate(3), pmc_attach(3), pmc_capabilities(3), pmc_configure_logfile(3), pmc_cpuinfo(3), pmc_detach(3), pmc_disable(3), pmc_enable(3), pmc_event_names_of_class(3), pmc_flush_logfile(3), pmc_get_driver_stats(3), pmc_get_msr(3), pmc_init(3), pmc_name_of_capability(3), pmc_name_of_class(3), pmc_name_of_cputype(3), pmc_name_of_event(3), pmc_name_of_mode(3), pmc_name_of_state(3), pmc_ncpu(3), pmc_npmc(3), pmc_pmcinfo(3), pmc_read(3), pmc_release(3), pmc_rw(3), pmc_set(3), pmc_start(3), pmc_stop(3), pmc_width(3), pmc_write(3), pmc_writelog(3) - programming API for using hardware performance monitoring counters
pthread_multi_np(3), pthread_single_np(3) - switch between multi- and single-threaded scheduling modes
pw(8) - create, remove, modify & display system users and groups
rmt(8) - remote magtape protocol module
rtprio(1), idprio(1) - execute, examine or modify a utility's or process's realtime or idletime scheduling priority
rtprio(2) - examine or modify a process realtime or idle priority
sbni(4) - Granch SBNI12 leased line modem driver
sbp_targ(4) - Serial Bus Protocol 2 (SBP-2) Target Mode devices driver
sbsh(4) - Granch SBNI16 SHDSL modem device driver
scon(1) - controls screen modes for pcvt video driver
snmp_atm(3), atmif_event_f(3), atm_find_if_name(3), atm_find_if(3), atm_notify_aif(3), atm_unnotify_aif(3) - ATM driver module for snmpd
snmp_hostres(3) - host resources module for snmpd
snmp_mibII(3), mibII(3), mibif_notify_f(3), mib_netsock(3), mib_if_set_dyn(3), mib_refresh_iflist(3), mib_find_if(3), mib_find_if_sys(3), mib_find_if_name(3), mib_first_if(3), mib_next_if(3), mib_register_newif(3), mib_unregister_newif(3), mib_fetch_ifmib(3), mib_if_admin(3), mib_find_ifa(3), mib_first_ififa(3), mib_next_ififa(3), mib_ifstack_create(3), mib_ifstack_delete(3), mib_find_rcvaddr(3), mib_rcvaddr_create(3), mib_rcvaddr_delete(3), mibif_notify(3), mibif_unnotify(3) - mib-2 module for bsnmpd
snmp_netgraph(3), snmp_node(3), snmp_nodename(3), ng_cookie_f(3), ng_hook_f(3), ng_register_cookie(3), ng_unregister_cookie(3), ng_register_hook(3), ng_unregister_hook(3), ng_unregister_module(3), ng_output(3), ng_output_node(3), ng_output_id(3), ng_dialog(3), ng_dialog_node(3), ng_dialog_id(3), ng_send_data(3), ng_mkpeer_id(3), ng_connect_node(3), ng_connect_id(3), ng_connect2_id(3), ng_connect2_tee_id(3), ng_rmhook(3), ng_rmhook_id(3), ng_rmhook_tee_id(3), ng_shutdown_id(3), ng_next_node_id(3), ng_node_id(3), ng_node_id_node(3), ng_node_name(3), ng_node_type(3), ng_peer_hook_id(3) - netgraph module for snmpd
snmpmod(3), INSERT_OBJECT_OID_LINK_INDEX(3), INSERT_OBJECT_INT_LINK_INDEX(3), FIND_OBJECT_OID_LINK_INDEX(3), NEXT_OBJECT_OID_LINK_INDEX(3), FIND_OBJECT_INT_LINK_INDEX(3), NEXT_OBJECT_INT_LINK_INDEX(3), INSERT_OBJECT_OID_LINK(3), INSERT_OBJECT_INT_LINK(3), FIND_OBJECT_OID_LINK(3), NEXT_OBJECT_OID_LINK(3), FIND_OBJECT_INT_LINK(3), NEXT_OBJECT_INT_LINK(3), INSERT_OBJECT_OID(3), INSERT_OBJECT_INT(3), FIND_OBJECT_OID(3), FIND_OBJECT_INT(3), NEXT_OBJECT_OID(3), NEXT_OBJECT_INT(3), this_tick(3), start_tick(3), get_ticks(3), systemg(3), comm_define(3), community(3), oid_zeroDotZero(3), reqid_allocate(3), reqid_next(3), reqid_base(3), reqid_istype(3), reqid_type(3), timer_start(3), timer_start_repeat(3), timer_stop(3), fd_select(3), fd_deselect(3), fd_suspend(3), fd_resume(3), or_register(3), or_unregister(3), buf_alloc(3), buf_size(3), snmp_input_start(3), snmp_input_finish(3), snmp_output(3), snmp_send_port(3), snmp_send_trap(3), string_save(3), string_commit(3), string_rollback(3), string_get(3), string_get_max(3), string_free(3), ip_save(3), ip_rollback(3), ip_commit(3), ip_get(3), oid_save(3), oid_rollback(3), oid_commit(3), oid_get(3), index_decode(3), index_compare(3), index_compare_off(3), index_append(3), index_append_off(3) - SNMP daemon loadable module interface
strmode(3) - convert inode status information into a symbolic string
touch(1) - change file access and modification times
umask(2) - set file creation mode mask
umodem(4) - USB modem support
utimes(2), lutimes(2), futimes(2) - set file access and modification times
utopia(4) - driver module for ATM PHY chips
utopia(9) - driver module for ATM PHY chips
what(1) - show what versions of object modules were used to construct a file
enc2xs(1) - -- Perl Encode Module Generator
instmodsh(1) - A shell to examine installed modules
perlmod(1) - Perl modules (packages and symbol tables)
perlmodinstall(1) - Installing CPAN Modules
perlmodlib(1) - constructing new Perl modules and finding existing ones
perlmodstyle(1) - Perl module style guide
perlnewmod(1) - preparing a new module for distribution
pl2pm(1) - Rough tool to translate Perl4 .pl files to Perl5 .pm modules
CONF_modules_free(3), CONF_modules_load(3), CONF_modules_unload(3) - OpenSSL configuration cleanup functions
CONF_modules_load_file(3), CONF_modules_load(3) - OpenSSL configuration functions
BIO_f_ssl(3), BIO_set_ssl(3), BIO_get_ssl(3), BIO_set_ssl_mode(3), BIO_set_ssl_renegotiate_bytes(3), BIO_get_num_renegotiates(3), BIO_set_ssl_renegotiate_timeout(3), BIO_new_ssl(3), BIO_new_ssl_connect(3), BIO_new_buffer_ssl_connect(3), BIO_ssl_copy_session_id(3), BIO_ssl_shutdown(3) - SSL BIO
BIO_s_accept(3), BIO_set_accept_port(3), BIO_get_accept_port(3), BIO_set_nbio_accept(3), BIO_set_accept_bios(3), BIO_set_bind_mode(3), BIO_get_bind_mode(3), BIO_do_accept(3) - accept BIO
BN_add(3), BN_sub(3), BN_mul(3), BN_sqr(3), BN_div(3), BN_mod(3), BN_nnmod(3), BN_mod_add(3), BN_mod_sub(3), BN_mod_mul(3), BN_mod_sqr(3), BN_exp(3), BN_mod_exp(3), BN_gcd(3) - arithmetic operations on BIGNUMs
BN_add_word(3), BN_sub_word(3), BN_mul_word(3), BN_div_word(3), BN_mod_word(3) - arithmetic functions on BIGNUMs with integers
BN_mod_inverse(3) - compute inverse modulo n
BN_mod_mul_montgomery(3), BN_MONT_CTX_new(3), BN_MONT_CTX_init(3), BN_MONT_CTX_free(3), BN_MONT_CTX_set(3), BN_MONT_CTX_copy(3), BN_from_montgomery(3), BN_to_montgomery(3) - Montgomery multiplication
BN_mod_mul_reciprocal(3), BN_div_recp(3), BN_RECP_CTX_new(3), BN_RECP_CTX_init(3), BN_RECP_CTX_free(3), BN_RECP_CTX_set(3) - modular multiplication using reciprocal
EVP_CIPHER_CTX_init(3), EVP_EncryptInit_ex(3), EVP_EncryptUpdate(3), EVP_EncryptFinal_ex(3), EVP_DecryptInit_ex(3), EVP_DecryptUpdate(3), EVP_DecryptFinal_ex(3), EVP_CipherInit_ex(3), EVP_CipherUpdate(3), EVP_CipherFinal_ex(3), EVP_CIPHER_CTX_set_key_length(3), EVP_CIPHER_CTX_ctrl(3), EVP_CIPHER_CTX_cleanup(3), EVP_EncryptInit(3), EVP_EncryptFinal(3), EVP_DecryptInit(3), EVP_DecryptFinal(3), EVP_CipherInit(3), EVP_CipherFinal(3), EVP_get_cipherbyname(3), EVP_get_cipherbynid(3), EVP_get_cipherbyobj(3), EVP_CIPHER_nid(3), EVP_CIPHER_block_size(3), EVP_CIPHER_key_length(3), EVP_CIPHER_iv_length(3), EVP_CIPHER_flags(3), EVP_CIPHER_mode(3), EVP_CIPHER_type(3), EVP_CIPHER_CTX_cipher(3), EVP_CIPHER_CTX_nid(3), EVP_CIPHER_CTX_block_size(3), EVP_CIPHER_CTX_key_length(3), EVP_CIPHER_CTX_iv_length(3), EVP_CIPHER_CTX_get_app_data(3), EVP_CIPHER_CTX_set_app_data(3), EVP_CIPHER_CTX_type(3), EVP_CIPHER_CTX_flags(3), EVP_CIPHER_CTX_mode(3), EVP_CIPHER_param_to_asn1(3), EVP_CIPHER_asn1_to_param(3), EVP_CIPHER_CTX_set_padding(3) - EVP cipher routines
OPENSSL_load_builtin_modules(3) - add standard configuration modules
RSA_size(3) - get RSA modulus size
SSL_CTX_get_verify_mode(3), SSL_get_verify_mode(3), SSL_CTX_get_verify_depth(3), SSL_get_verify_depth(3), SSL_get_verify_callback(3), SSL_CTX_get_verify_callback(3) - get currently set verification parameters
SSL_CTX_set_mode(3), SSL_set_mode(3), SSL_CTX_get_mode(3), SSL_get_mode(3) - manipulate SSL engine mode
SSL_CTX_set_session_cache_mode(3), SSL_CTX_get_session_cache_mode(3) - enable/disable session caching
SSL_set_connect_state(3), SSL_get_accept_state(3) - prepare SSL object to work in client or server mode
X509_NAME_add_entry_by_txt(3), X509_NAME_add_entry_by_OBJ(3), X509_NAME_add_entry_by_NID(3), X509_NAME_add_entry(3), X509_NAME_delete_entry(3) - X509_NAME modification functions
engine(3) - ENGINE cryptographic module support
B::Stackobj(3) - Helper module for CC backend
CGI::Apache(3) - Backward compatibility module for CGI.pm
CGI::Pretty(3) - module to produce nicely formatted HTML code
CGI::Switch(3) - Backward compatibility module for defunct CGI::Switch
CGI::Util(3) - Internal utilities used by CGI module
CPAN(3) - query, download and build perl modules from CPAN sites
CPAN::Nox(3) - Wrapper around CPAN.pm without using any XS module
Devel::SelfStubber(3) - generate stubs for a SelfLoading module
Digest(3) - Modules that calculate message digests
Env(3) - perl module that imports environment variables as scalars or arrays
Exporter(3) - Implements default import method for modules
ExtUtils::Installed(3) - Inventory management of installed modules
ExtUtils::MakeMaker(3) - Create a module Makefile
ExtUtils::MakeMaker::Tutorial(3) - Writing a module with MakeMaker
File::Spec::Unix(3) - File::Spec for Unix, base for other File::Spec modules
Filter::Util::Call(3) - Perl Source Filter Utility Module
IO(3) - load various IO modules
Math::BigInt::Calc(3) - Pure Perl module to support Math::BigInt
Memoize::Expire(3) - Plug-in module for automatic expiration of memoized values
Pod::Html(3) - module to convert pod files to HTML
Term::Complete(3) - Perl word completion module
Test::Builder::Module(3) - Base class for test modules
XS::Typemap(3) - module to test the XS typemaps distributed with perl
autouse(3) - postpone load of modules until a function is used
if(3) - use a Perl module if a condition holds
|
|
Copyright ©2006 TheBestISP.com |
|
|
|
 |
|
Home